Skip to main content

ClipperView Flow Monitoring Solutions

​Combined Sewer Overflow Monitoring

Gain Real-Time Insight into System Capacity and Overflow Risks

Combined sewer systems face increasing regulatory pressure and infrastructure challenges. ClipperView helps utilities monitor critical sites in real time—delivering alerts, historical trends, and predictive insight to reduce CSO events and stay in compliance.

The Challenge of CSOs

During wet weather, combined sewer systems can exceed capacity, discharging untreated wastewater into the environment. These overflow events can:

  • Trigger regulatory violations
  • Harm public health and ecosystems
  • Lead to costly fines and emergency responses


ClipperView gives operators the data needed to act before an overflow occurs.


Monitor • Predict • Prevent

1. Deploy Reliable Flow Monitoring

ClipperView integrates with ISCO Signature or Duratracker units connected to LaserFlow, bubbler, ultrasonic, or area velocity flow meters. Install at overflow points, interceptors, or regulators.

2. Receive Instant Overflow Alerts

Set threshold alarms for level and flow rate. When pre-determined limits are reached, field crews receive SMS or email alerts—enabling rapid response.

3. Analyze Performance Over Time

Understand how rainfall, infiltration, and dry weather flows contribute to system behavior. Use overlay graphs to compare events, review trends, and guide mitigation plans.

Traditional vs. ClipperView CSO Monitoring

FeatureTraditional Event LoggingClipperView Platform
Data Collection MethodManual downloads or SCADA integrationAutomatic cloud upload via cellular or existing network
Event DetectionPost-event review of logged dataReal-time threshold alerts via text or email
System CoverageLimited to priority or accessible sitesScalable across all monitored sites
AccessibilityRequires on-site device or SCADA accessViewable on mobile, tablet, or desktop
Response TimeDelayed—requires manual data reviewImmediate alerts enable rapid response
ReportingManual report creationCustom, exportable reports on demand
Trend AnalysisLimited long-term visibilityGraph overlays for rainfall, flow, and level trends
Setup ComplexityRequires IT and infrastructure setupQuick cloud setup—no IT required
Overflow Response Management

Designed for Overflow Response Management

  • Visualize All Sites on a Single Dashboard
    Prioritize inspection and response activities
  • Predict Events Before They Happen
    With trend-based analysis and dynamic thresholds
  • Reduce Site Visits and Confined Space Entries
    View all data remotely without manual downloads
  • Track Regulatory Metrics
    Export custom reports for compliance documentation

Use ClipperView for:

  • CSO Outfall Monitoring

  • Long-Term Control Plan (LTCP) Support

  • Verifying Effectiveness of Control Measures

  • Overflow Frequency and Duration Tracking

  • Modeling System Performance During Storms

ClipperView Flow Monitoring System

Smarter CSO Management Starts Here

With ClipperView, utilities can deploy fast, monitor in real time, and reduce the frequency and severity of CSO events.

  • Cellular or existing connectivity options

  • Unlimited users and cloud-hosted platform

  • Secure Tier 4 data center storage

  • ISCO Signature & Duratracker compatibility

Monitor Your First Site Today

Request a CSO Demo
Talk to Sales

​Inflow & Infiltration (I&I) Reduction System

Use ClipperView to Detect and Manage Extraneous Flow

Excess water in your sewer systems—whether from rainfall or groundwater infiltration—can overload capacity, increase treatment costs, and jeopardize compliance. ClipperView helps utilities pinpoint sources of I&I through intelligent data collection and long-term trend analysis.

The Hidden Cost of I&I

I&I contributes to:

  • Overloaded collection systems
  • Excessive treatment plant inflow
  • Increased energy and chemical use
  • Risk of sanitary sewer overflows (SSOs)
  • Reduced system lifespan and repair budgets


ClipperView provides the data needed to take targeted action.

The Hidden Cost of Inflow and Infiltration (I&I)

How ClipperView Supports I&I Reduction

1. Capture Flow at the Source

Deploy ISCO Signature or Duratracker instruments with area velocity, ultrasonic, LaserFlow, or bubbler sensors in key manholes or interceptors.

2. Collect & Compare Data Over Time

ClipperView overlays flow and rainfall data from multiple sites, revealing infiltration patterns and peak flow anomalies.

3. Analyze Trends, Not Just Events

Unlike isolated snapshots or site visits, ClipperView stores historical and real-time data in one interface, allowing seasonal, event-based, or gradual infiltration analysis.

4. Prioritize Field Response

Use dashboards to identify where extraneous flow is worst, schedule CCTV inspections, or validate lining and repair projects.

Benefits of Using ClipperView for I&I

  • Pinpoint I&I Hotspots: Identify inflow sources with rainfall correlation and monitor pre/post rehabilitation effectiveness

  • Support CIP Planning: Back capital projects with real data

  • Avoid Regulatory Penalties: Detect issues early and stay in compliance

  • Reduce Site Visits: View and analyze data remotely—no manual downloads needed

  • Keep Crews Safe: Eliminate traffic control and confined space entries unless necessary

ClipperView Flow Monitoring Software Scatterplot

Your Partner in Proactive Sewer Management

Request a Demo
Talk to Sales

ClipperView provides a scalable, cost-effective way to understand your system and reduce I&I:

  • Compatible with ISCO flow meters and rain gauges
  • Custom graphs and reporting templates
  • Unlimited users and cloud-based access
  • Expert support to get your system configured fast

​Sewer Blockage Prediction & Prevention

Advanced Effluent Flow Management with ClipperView

ClipperView offers turn-key effluent flow monitoring: sensor-agnostic setup, cloud analytics, real-time alerts, and rich visual reporting—empowering utilities to act early, maintain compliance, and optimize field operations.

Effluent systems are complex and early detection is critical. ClipperView combines real-time hardware monitoring with cloud-based analytics to help you monitor flow, predict abnormal changes, and take action before compliance risks escalate.

Why ClipperView?

  • Optimize field resources and reduce unnecessary site visits
  • Protect infrastructure from overcleaning and degradation
  • Enhance compliance with early alerts before thresholds are exceeded
  • Keep crews safe and minimize traffic disruptions

The Challenge: Effluent Flow Risks

Effluent systems—whether they include combined, sanitary, or industrial flow—can mask the early signs of non-compliance or inflow/infiltration. Traditionally, routine sampling or scheduled cleanings catch issues late, at high cost.

ClipperView solves this by continuously monitoring effluent levels and flow trends with your existing hardware—providing early warning of deviations while reducing wasted labor and field time.

How ClipperView Works

  1. Smart Sensors + Logger Setup
    Connect your ISCO Signature or Duratracker to a supported flow meter—area-velocity, LaserFlow, ultrasonic, or bubbler—and set it up with ClipperView’s initial configuration.

  2. Continuous Data Streaming
    Flow, level, and optionally rainfall data are transmitted wirelessly to the cloud, eliminating manual downloads and site trips.

  3. Cloud-Based Analytics
    Our platform applies heuristic trend detection and pre-configured rulesets to identify anomalies, threshold breaches, or unusual I&I patterns.

  4. Empowered Response
    Use actionable insights to schedule crews, optimize cleaning plans, compile reports, and stay ahead of regulatory needs.

  5. Instant Alerts & Visualization
    Get real‑time text or email alarms when key thresholds are crossed. View overlay graphs, site summaries, and performance dashboards—accessible on any device.

Empower Decisions With Data

  • Predict Emerging Issues – See trends before they impact compliance
  • Overlay Long-Term Patterns – Compare data across seasons and sites to analyze I&I
  • Deploy with Confidence – Customize templates, unlimited users, and full support ensure your team is operational from day one
Request a Demo
Talk to Sales

​Collection System Capacity Management

Turn Flow Data into Smarter, Safer Sewer System Decisions

Wastewater systems are under increasing stress—from growing populations to more frequent storm events. ClipperView helps you monitor, visualize, and manage collection system capacity using continuous flow data, event detection, and historical pattern analysis.

Avoid Overflows. Optimize Maintenance. Plan with Confidence.

Utilities face a constant challenge: keeping systems within design capacity while avoiding costly overflows, cleanings, or unnecessary upgrades. ClipperView gives you a real-time view of system performance—across all sites—so you can make data-backed decisions.

ClipperView Helps You:

  • Detect Capacity Constraints
    Identify bottlenecks, flow restrictions, and wet-weather surcharges with live and historical data overlays.

  • Manage Peak Flows Proactively
    Use threshold alarms and flow patterns to shift response from reactive to preventative.

  • Reduce O&M Costs
    Schedule cleanings and inspections only where needed. Avoid routine tasks where capacity is under control.

  • Support Long-Term Planning
    Analyze seasonal trends, diurnal cycles, and flow response to rainfall for better capital project justification.

ClipperView Flow Monitoring System Velocity Measurement Graphed With Alarm Setpoint

How it Works

  1. Deploy ClipperView-Compatible Monitors
    Use ISCO Signature, Duratracker, or supported flow meters with ultrasonic, LaserFlow, bubbler, or area velocity technology.

  2. Stream Flow & Level Data to the Cloud
    ClipperView transmits and stores all site data securely—no manual downloads, no IT headaches.

  3. Alert & Act
    Custom alarms notify field teams when critical thresholds are approached—helping prioritize crews and avoid SSOs.

  4. Visualize System Capacity
    Review current status and past trends from one dashboard. Overlay data from different sites to compare load distribution.

Use ClipperView For:

  • Interceptor monitoring
  • Overflow risk management
  • Wet-weather event response
  • Pipe rehab effectiveness tracking
  • Treatment plant inlet flow balancing
ClipperView Flow Management Software

Designed for Flow Decision-Makers

  • Unlimited users with secure, cloud-based access
  • Historical + real-time analysis of system performance
  • Custom graph overlays and reporting
  • Compatible with ISCO and common flow measurement devices
Request a Demo
Talk to Sales

​Accurate Wastewater Billing System

ClipperView delivers defensible billing data backed by precision instrumentation, automated reporting, and real-time transparency.

Trust Your Data. Bill With Confidence.

When sewer billing is based on flow volume, accuracy matters. ClipperView provides reliable, site-specific data for interjurisdictional billing, cost recovery, and service accountability. Get full visibility into what’s flowing—where, when, and how much.

Stop Disputes Before They Start

Billing disputes between agencies or customers often stem from unclear or inconsistent data. With ClipperView, you get a continuous, defensible record of flow backed by field-proven instruments and secure cloud reporting.

ClipperView Enables:

  • Reliable Flow Measurement
    Track volume at key monitoring points using ISCO Signature or Duratracker units with area velocity, ultrasonic, or bubbler flow sensors.

  • Data Transparency Across Entities
    Share live dashboards or periodic reports with partner agencies to build trust and resolve discrepancies.

  • Automated Compliance Reporting
    Generate billing reports and audit histories with the click of a button.

  • Site-by-Site Accountability
    View flow data for individual districts, customers, or facilities to support equitable cost distribution.

Key Applications of ClipperView

  • Inter-municipal sewer agreements
  • Industrial contributor billing
  • Cost recovery for treatment services
  • Proof of discharge volumes
  • Surcharging and penalty enforcement
Flow Monitoring Software for Billing Illustration

Why ClipperView for Billing?

  • No missed data — Continuous monitoring eliminates gaps
  • No manual downloads — Everything stored securely in the cloud
  • No disputes — Clear, defensible records of actual flow
Request a Demo
Talk to Sales

Want to take control? 
Let's talk.

Call us
Send a Message
Clipper Controls Swallowtail Flag Logo